COVID19 - All orders being processed as normal - Our Showroom remains closed until further notice.

In Press

  1. October 01, 2020

    Business or the Year - East Herts

    Throwback Thursday – Looking back at our Business of the Year – East Herts first place award at the Herts Chamber event last year!

    We are also very proud for reaching 7 final awards and for our runners up titles for Digital Marketing Campaign of the Year and Business of the Year – Small to Medium.

    The Judges commended our team for our “innovative and responsible approach” to customers and “strong growth” in our “impressive business.

    Another huge thank you to everyone in our team for their hard work!

    Read More
  2. September 15, 2020

    Moore and Wright Dial Caliper Review

    Hackspace Magazine praises our Moore and Wright Dial Caliper for its "high precision finish" and "straightforward", "accurate" measuring.

    They complimented the "good quality steel" and "prominent markings", as well as crediting the additional screw mechanism simplifying the zeroing procedure.

    The article also noted their appreciation of our "great customer service and prompt delivery" when purchasing the iconic Moore and Wright branded tool.

    Putting other calipers "to shame", our Dial Indicator was scored a 10/10 for its impressive qualities. Part no. - MEB-MW142-15

    Please see our website listing or contact our products specialists for more information

    Read More
  3. August 20, 2020

    Throwback Thursday

    Throwing it back this Thursday to our advert and feature in Machinery World October 2019! This rundown of selected DRO’s and Encoders we offer makes for an exciting read. The editorial covers our own popular brand M-DRO as well as featuring other leading brands Mitutoyo, Newall, Easson and Acu-Rite. Please contact our sales team for more information on any of the products advertised, or check out the full range on our website!”

    Read More
  4. June 03, 2020

    Wixey WR360 feature

    The Wixey WR360 digital angle gauge has been featured in “Model Engineers Workshop” for an interesting application. The article consists of Howard Lewis’ use of the digital angle gauge as an aid to sharpen drills. He began by using a clamp to set it parallel to the face of the grinding wheel. The aluminium is then milled to a rectangular block, set at 59 degrees with the assistance of the WR360. Once a tip angle of 118 degrees is positioned, the vice is tilted up at 45 degrees for a 90 degree vee to be cut by the end mill. This is just one useful example of how our Wixey digital angle gauge can be used to execute a task comfortably with precision. Find your own solutions and buy one here https://www.machine-dro.co.uk/wixey-digital-angle-gauge-with-hold-function-and-level-bubble .

    Read More
  5. June 03, 2020

    Edge Technology ME-ED-44-000 feature

    Model Engineers Workshop” describes how our Edge Technology Indicator holder is used to fix a DTI onto a mill.

    Peter shares his smart solution for the difficulty of finding a solid fixing point for a DTI on his Alpine mill. He found a spare 3/8” chuck and 3/8” internal thread in his collection and set about fitting the z axis sender mounting, leaving approximately 30mm studding extra.

    He then proceed to merely turning down a piece of 12x1.75mm studding. A 3/8” x 24 thread was cut on opposite side of the chuck and they joined together with a 12mm extension nut. This solution allowed him to clamp a range of bracket fittings in addition to this initial purpose. You can view our Edge Technology Indicator Holder with 3/8" Shank Mount here https://www.machine-dro.co.uk/edge-technology-indicator-holder-with-3-8-shank-mount .

    Read More
  6. October 29, 2019

    Eliminating Backlash on a Milling Machine Quill with a Vertical Linear Digital Scale



    There has been a fantastic article written by one of our customers who purchased the Vertical Linear Digital Scale for his milling machine to eliminate backlash.

    “On my machine, even with the spindle bearings correctly adjusted, there is around a millimetre (40 thou in imperial) of backlash, I assume this slack must be in the rack and pinion, the effect of this is that the quill clamp always needs to be slightly tightened putting additional pressure on the rack and pinion making it harder to move the quill. Failure to clamp the quill can result in a chattering cutter that can drift up and down when machining. I have seen people fit springs to hold the quill rack up against the pinion but spring rates change as the
    Read More
  7. October 16, 2019

    Our Ultrasonic Cleaner Features on BBC1’s The Repair Show



    As seen on Episode 24, Series 4 of The Repair Shop - Music box maestro, Stephen Kember is on hand to welcome an unusual item into the barn: a wooden bench from Switzerland, with two carved bears, proudly standing sentinel on either side of a seat that plays a tune when sat upon.

    Our Ultrasonic Cleaner features in this episode to clean the musical mechanism (called the Guvnor) which helps regulate the speed the mechanism turns. Stephen says; “This is a lovely and gentle way of shaking all of the debris out of the Guvnor and all of the congealed oil out of the bearings. It will do a lovely job and there will be no abrasion, no risk from cleaning of scrubbing, it’s just going to do its job.” As the musical mechanism is then taken out after the cleaning cycle has finished, Stephen says; “We’ve got a beautifully sparkly clean Guvnor…
    Read More
  8. October 08, 2019

    Editorial in the Machinery World Magazine for our DRO’s & Encoders



    Catch Machine DRO in the latest edition of the Manufacturing Machinery World magazine this month and read an interesting editorial on our DRO's & Encoders on page 25. It’s a great read with an overview of selected products we offer in terms of our digital readouts and encoders from a host of leading brands such as Mitutoyo, Newall and our own popular brand, M-DRO.
    Read More
  9. September 02, 2019

    Mitutoyo 500-196-30 Absolute AOS Digimatic Caliper – Rated No.1 for Machinists



    It’s one of the first tools that come to mind when you ask a machinist to name a measuring tool and the caliper is normally the most important tool in their toolbox. A recent Top 5 Digital Calipers for Machinists article put together and published by Practical Machinist have given the crown to the worthy winner which is the Mitutoyo 500-196-30 Absolute AOS Digimatic Caliper.

    The Japanese-made Mitutoyo AOS Digitmatic Caliper is the best in class when it comes to precision metrology hand tools. It’s equipped with standard outside and inside jaws, made from hardened stainless steel construction and has ABSOLUTE System scale for error-free, high-speed measurements. The ZERO/ABS button
    Read More
  10. July 29, 2019

    Mercedes-AMG Petronas Motorsport Using Baty Profile Projectors



    The world of F1 is the pinnacle of technology in sport, which is why the best equipment and most precise measuring tools are used across all F1 teams.

    In a video posted by Mercedes-AMG Petronas Motorsport, it shows Valtteri Bottas being shown around PETRONAS University of Technology in Brackley, including a demo of the Baty SM350 Vertical Profile Projector. Precision and accuracy is an extremely high priority when working with the engineering of a Formula 1 car, hence why Baty Profile Projectors such as the one mentioned can be found in workshops such as those in the PETRONAS University of Technology. You can find the full video
    Read More
Page